Wet/Dry Grinding

Wet/Dry Grinding
●Ducted Units
●Portables
●FilterWalls/Backdrafts
●Booths

Wet and Dry Grinding:
Of #1 Importance: An Industrial Dust Collection Solution that Fits

At Industrial Maid we are very proud of our "workhorse" the T-Series. The use of a T-style air cleaner configuration offers some key advantages for "free hanging" dust fume extraction systems :

Industrial Dust Collection
Model T4500x2 Side Ducted Air Cleaner
Check out the specifications (opens in new window)

Clean air throw is at 90° from the intakes, again contributing to better airflow patterns throughout a workspace.
Dual intake - Twice the normal intake area of a straight through air cleaner. More intake guarantees a better airflow pattern and efficiency is a key driver in any industry that deals with grinding dust or sanding dust.
Dual filters - Twice the filter media of a straight through dust collecting equipment equates to longer filter life & longer filter service intervals which in turn equates to dollars saved.

Dust Fume Extraction Systems

PORTABLES

grinding dust
Model 36 PAC W/Arm

Mobile mechanical dust extraction systems for welding fumes, grinding dust, etc. The flexible extraction arm captures fumes, sanding dust and grinding dust at a distance of 30-50 cm (12-20'') from the source and within an area of 0.5m (20'') diameter. Yellow hood w/ optimized airflow & ring handle & built in damper. Flame proof PVC hose 150 mm (6”)Ø. This unit can also be fitted with an activated carbon filter which removes gases or a 99.97% Hepa for removal of Hexavalent Chromium and other pollutants. Available with 7, 10 & 14 ft long arms. Also available with an optional 24" x 24" downdraft bench in lieu of arm, (not shown). Other features include, easy access service doors, tool-less filter change out & removable dust tray.

FILTER WALLS & ENVIRONMENTAL BOOTHS

Dust extraction systems
Model FW35-4

Industrial Maid announces the new addition of a “side draft” filter wall unit for use in industrial manufacturing plants to contain welding smoke & fumes, grinding dusts, vapors and other air borne contaminants. This unit is mounted on a steel pallet with fork lift slips, offers three stages of filtration – 1) 2” polyester pre-filter or 2” spark baffle filter – 2) 4” pleated filter & 3) 45% to 95% multi pocket bag filter. The grinding dust collector has a cabinet manufactured from high density polyethylene plastic – making it lighter, quieter, non-corrosive and environmentally friendly versus a steel cabinet system. The unit runs on low horsepower ratings, uses low air to cloth ratios and requires no compressed air or control boards for operation. The maintenance is fast and simple – access thru the front or an option is available for rear access doors and no tools are required. The units offer business and industry a “lower cost of ownership” as compared to existing technologies.

grinder dust collector
Model FW35-4 w/Environmental Booth

Industrial Maid has designed a unique environmental control booth as an industrial dust collector to help contain grinder dust in the workplace. The system incorporates a three stage media style filtration system, powered by a totally enclosed motor and belt drive blower package. Three standard sizes are available - 6” width, 10’ width and 20’ width. The booth housing is modular in design with acoustical sound control. Our industrial dust collectors have fork lift slips and airflow range from 4,500 to 15,000 CFM. As with other Industrial Maid equipment, the outer cabinet shell is manufactured using a recycled polyethylene plastic, making it lighter, quieter, less expensive and more environmentally friendly than a typical carbon steel cabinet. These dust fume extraction systems do not require use of compressed air and have a lower energy consumption rate as compared to similar cartridge style units.

BACKDRAFT

grinding dust collector
Model EB56 MOD

Industrial Maid introduces the new Model EB56 series packaged air filtration unit. This dust fume extractor is designed to handle welding smoke and fumes, grinding dust and other airborne particulates. The powerful 4500 CFM, 5 HP motor with a direct drive high pressure BI composite blower makes the system quiet, efficient and easy to service. The air passes through a spark baffle for arrestance, then moves through a plenum chamber to eliminate heavy particles, then lastly passes thru a Merv 7 and Merv 14 series of filters. A HEPA final filter is also available to meet hexavalent chromium fume standards for the dust metal of stainless steel welding.

DOWNDRAFT

industrial dust collectors
Model M36 Dual PAC

Problem: Insuring the health and safety of workers while raising productivity levels.

Many materials generate grinding dust which not only poses severe health risks to employees, but can also affect the finish of the products. Finding the best equipment to capture and remove airborne particles and sparks is important but it doesn't have to be complicated. At Industrial Maid we have engineers with years of experience when it comes to putting together all of the factors you need to consider when selecting a dust purifier system. We have included a few application pictures here to demonstrate that there are many options when designing a dust suppression plan to fit your needs.

Solution: Choosing the right air filtration system. Industrial Maid can help.

At Industrial Maid we use the newest technology to design and manufacture air filtration equipment that will address the problems all business face including space, air flow, costs, efficiency and challenges that are specific to the type of material you are grinding, sanding or polishing. Another very important consideration is the size and type of filters that best suit the system you choose. Give us a call at TF: 877-624-3247 or send us an email: sales@industrial-maid.com. We carry a full line of pleat, bag, and HEPA filters so be sure to ask our staff which would be best for your type of dust collector system.

●Back to Home Page