|
Granite & Stone
●T-Series
Ambient
●Ducted Units
●Portables
●Filter Walls/Backdrafts
●Booths
●Back
to Home Page
|
Granite/Stone Grinding:
We pay attention to the Air you
Breathe.
Model T4500x2 Side Ducted Air Cleaner
Check
out the
specifications
(opens in new window)
-
Clean air throw is at 90° from the
intakes, again contributing to
better airflow patterns throughout a
workspace.
-
Dual
intake - Twice the normal intake
area of a straight through air
cleaner. More intake
guarantees a better airflow pattern
and efficiency is a key driver in
any industry that deals with
grinding dust or sanding dust.
-
Dual
filters - Twice the filter media of
a straight through dust collecting
equipment
equates to longer filter life
& longer filter service
intervals which in turn
equates to dollars saved.
Model 36 PAC W/Arm
Mobile mechanical dust extraction
systems for welding
fumes, grinding dust, etc. The flexible extraction
arm captures fumes, sanding dust and
grinding dust at a
distance of 30-50 cm (12-20'') from
the source and within an area of
0.5m (20'') diameter. Yellow
hood w/ optimized airflow & ring
handle & built in damper. Flame
proof PVC hose 150
mm (6”)Ø.
This unit can also be fitted with an
activated carbon filter which
removes gases or
a 99.97% Hepa for removal of
Hexavalent Chromium and
other pollutants.
Available with 7, 10 & 14 ft long
arms. Also available with an
optional 24" x 24" downdraft bench
in lieu of arm, (not shown). Other
features include, easy access
service doors, tool-less filter
change out & removable dust tray.
|
FILTER WALLS
& ENVIRONMENTAL BOOTHS |
Model FW35-4
Industrial
Maid announces the new addition of a
“side draft” filter wall unit for use in
industrial manufacturing plants to
contain welding smoke & fumes, grinding
dusts, vapors and other air borne
contaminants. This unit is mounted on a
steel pallet with fork lift slips,
offers three stages of filtration – 1)
2” polyester pre-filter or 2” spark
baffle filter – 2) 4” pleated filter &
3) 45% to 95% multi pocket bag filter.
The system has a cabinet manufactured
from high density polyethylene plastic –
making it lighter, quieter,
non-corrosive and environmentally
friendly versus a steel cabinet system.
The unit runs on low horsepower ratings,
uses low air to cloth ratios and
requires no compressed air or control
boards for operation. The maintenance
is fast and simple – access thru the
front or an option is available for rear
access doors and no tools are required.
The units offer business and industry a
“lower cost of ownership” as compared to
existing technologies.
Model FW35-4 w/Environmental
Booth
Industrial Maid has designed a unique
environmental control booth to help
contain fugitive dust in the industrial
workplace. The system incorporates a
three stage media style filtration
system, powered by a totally enclosed
motor and belt drive blower package.
Three standard sizes are available - 6”
width, 10’ width and 20’ width. The
booth housing is modular in design with
acoustical sound control. The air
filtration module has fork lift slips
and an airflow range from 4,500 to
15,000 CFM. As with other IM LLC
equipment, the outer cabinet shell is
manufactured using a recycled
polyethylene plastic, making it lighter,
quieter, less expensive and more
environmentally friendly than a typical
carbon steel cabinet. The booth systems
do not require use of compressed air and
have a lower energy consumption rate as
compared to similar cartridge style
units.
Model EB56 MOD
Industrial
Maid
introduces the new Model
EB56 series packaged air filtration
unit. This system is designed to handle
welding smoke and fumes, grinding dust
and other airborne particulates. The
powerful 4500 CFM, 5 HP motor with a
direct drive high pressure BI composite
blower makes the system quiet, efficient
and easy to service. The air passes
through a spark baffle for arrestance,
then moves through a plenum chamber to
eliminate heavy particles, then lastly
passes thru a Merv 7 and Merv 14 series
of filters. A HEPA final filter is also
available to meet hexavalent chromium
fume standards for stainless steel
welding.
Model M36 Dual PAC
|
Problem:
Grinding and
sanding, especially with machines can create
fine dust from the stone being
worked.* There are also inhalation
hazards from grinding wheel dust (especially
sandstone wheels).
Finding the best equipment to capture and
remove granite and other stone grinding dust
is important but it doesn't have to be
complicated. At Industrial Maid we
have engineers with years of experience when
it comes to putting together all of the
factors you need to consider when
implementing an air filtration system.
We have included a few application pictures
to demonstrate that there are many options
when designing an air filtration plan to fit
your needs.
Solution: Choosing the right system to
insure Employee safety. Industrial
Maid can help.
At Industrial Maid we use the
newest technology to design and manufacture air
filtration equipment that will address the
problems all business face including space, air
flow, costs, efficiency and challenges that are
specific to the type of stone you are grinding.
Another very important consideration is the size
and type of filters that best suit the system
you choose. Give us a call at TF:
877-624-3247 or
send us an email:
sales@industrial-maid.com. We carry a full
line of pleat, bag, and HEPA filters so be sure
to ask our staff which would be best for your
type of application.
*Crystalline silica is in
most rocks, sands, clays and also products
such as bricks tiles and concrete. When
these materials are ground, cut, sanded,
carved etc, dust is created. In most cases
this dust is fine enough to be breathed deep
into the lungs. The fine dust is called
Respirable Crystalline Silica (RCS).
Exposure to RCS puts workers at risk of
developing silicosis or Chronic Obstructive
Pulmonary Disease (COPD), which prevents
proper breathing . COPD is a term that
includes chronic bronchitis and emphysema.
At Industrial Maid we use the
newest technology to design and manufacture air
filtration equipment that will address the
problems all business face including space, air
flow, costs, efficiency and challenges that are
specific to your industry.
Another very important consideration is the size
and type of filters that best suit the system
you choose. Give us a call at TF:
877-624-3247 or
send us an email:
sales@industrial-maid.com. We carry a full
line of pleat, bag, and HEPA filters so be sure
to ask our staff which would be best for your
type of application.
|
●Back
to Home Page
|
